945 Alloy

Alloy name: 945
Diagram No.: 1108
Type of diagram: TTT
Chemical composition in weight %: 47.1% Ni, 22.4% Fe, 20.5% Cr, 3.2% Mo, 3.1% Nb, 2.0% Cu, 1.49% Ti, 0.20% Al, 0.011% Cu, 0.07% Mn, 0.0004% S
Alloy group: Nickel-based alloys
Note: All analytical data is presented in table. Based on this information, a TTT plot is presented in figure. Starting material annealed at 1038C for 2h had a grain size of ASTM #2. It had essentially clean grain boundaries. The material did contain geometric intra-granular TiN particles shown later in the text. These are formed during the melt. Starting material also contained predominantly intra-granular, isolated spherical NbC carbide particles, which are primarily formed during thermo-mechanical processing. These NbC particles were earlier shown. All the analyzed TTT samples contained these two precipitates. Therefore, TiN and NbC are not shown in the TTT plot. It should be mentioned that the plot on Gamma'/Gamma'' is primarily based on hardness testing. Stability of various phases is described below.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.