Molten fluxes for high-speed continuous casting of middle-carbon steel

Name: Molten fluxes for high-speed continuous casting of middle-carbon steel
Diagram No.: 1120
Type of diagram: CCT
Chemical composition in weight %: See the table
Goup: Slags
Note: Figures, where they differ in the mass ratio of Ca0/Si02, show the CCT curves obtained at various cooling rates. These figures indicate that all the crystallization temperatures decrease with increasing the cooling rate. Similarly, the curves shift to lower temperatures with increasing the MgO content. As seen, the crystallization temperatures in second Figure are slightly lower than those in first Figure.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.