Mold Slags

Name: Mold Slags
Diagram No.: 1180
Type of diagram: TTT
Chemical composition in weight %: See the table
Group: Slags
Note: Mold fluxes contain the volatile components, and this might result in the change of chemical compositions during CSLM observations. The main vapor species are SiF4, SiO, Na2F2, CaF2, AlOF, AlF3 under the experimental temperature ranges, and their vapor pressures change in the range of 10.6 to 10.9 atm with varying temperature and chemical compositions.) Analysis indicated however that the evaporation rate is very low when the experimental temperature is lower than 1400C. Therefore, the evaporation is expected to be low during the CSLM observations. Unfortunately, the CSLM samples were of too small a size to verify the chemistry through chemical analysis after the experiments.
The diagrams for slags No. 1 and No. 2 show a half C shape. A certain amount of crystals were formed during the cooling process when the temperature was below 1125C and 1100C for slag No. 1 and No. 2, respectively.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.