NiS Glass

Name: NiS
Diagram No.: 736
Type of diagram: TTT
Chemical composition in weight %: NiS
Alloy group: Galsses
Note: TTT diagram of NiS at the different rate of rising temperature. Figure shows the TTT diagram from the alpha to beta transformations of the NiS in the glass. The stable area of the beta-phase differs due to the different rate of rising temperature in the heat-soak treatment. The temperature of nucleation and crystal growth of the beta NiS at a low rate of increasing temperature is lower than that at a high rate of temperature increase. The stable area of the temperature of the beta NiS is wider under the lower rate of temperature increase. The stable area (temperature and time) of the beta phase of the NiS is wide; therefore, we can perform heat treatment of the NiS at a lower temperature (from 200C to 250C) at a low rate of temperature increase (less than 10C/min).
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.



Copyright © 2019 by Steel Data. All Rights Reserved.