NiSn3 Alloy

Alloy name: NiSn3
Diagram No.: 942
Type of diagram: TTT
Chemical composition in weight %: NiSn3
Alloy group: Nickel-based alloys
Note: TTT diagram for NiSn3 IMC (intermetallic compounds). The line on the left represents the beginning of transformation (5% transformed); the line on the right, the completion of transformation (95% transformed).
As we can see from the TTT diagram, NiSn3 will fully transform at 260C (470F) in less than one second, while at 215C (419F) it will take about 10s seconds (i.e., about 28 h). Samples were aged (using two-step aging) to produce large intermetallic growth and then tested for solderability at these temperatures (5 s dip). The 215C samples have large nonwetted areas, and the wetted areas display a lot of surface irregularities. Wetting is much better for 260C samples, but again there are a lot of surface irregularities (bumps).
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.