Ti-bearing Blast Furnace Slags

Name: Ti-bearing Blast Furnace Slags
Diagram No.: 982
Type of diagram: TTT
Chemical composition in weight %: See the table
Group: Slags
Note: TTT curves of the modified slags (a) slag series A and (b) slag series B.
Figure illustrated the TTT curves in this study. As can be observed, these TTT curves showed a similar shape, i.e., double C from high temperatures to low temperatures, which was supposedly the occurrence of two different crystallization events. As the holding temperature was above the break temperature, there was no crystal precipitated. With the holding temperature decreasing lower than the break temperature, crystallization occurred in the melts. For slag series A, rod shape crystal was the primary crystalline phase and first observed to form below break temperature in slag melts.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.