Fluorine-free Mould Fluxes

Name: Fluorine-free Mould Fluxes
Diagram No.: 988
Type of diagram: TTT
Chemical composition in weight %: See the table
Group: Slags
Note: TTT diagrams of mould fluxes showing the onset (0.5 vol%) and end (95 vol%) of crystallisation: (a) Sample 1: CaO/SiO2= 0.9; (b) Sample 2: CaO/SiO2=1.0; (c) Sample 3: CaO/SiO2=1.1; (d) Sample 4: CaO/SiO2=1.2; and (e) onset of crystallisation at different CaO/SiO2 ratios.
TTT diagrams of mould fluxes with different CaO/SiO2 ratios are presented in Figs. (a) to (d); Fig. (e) compares the onsets of crystallisation of mould fluxes with different CaO/SiO2 ratios. As CaO/SiO2 ratio increased, the incubation time decreased and the highest crystallisation temperature increased. It is noteworthy that the mould fluxes with CaO/SiO2 = 1.2 started crystallisation before it reached isothermal temperature.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.



Copyright © 2019 by Steel Data. All Rights Reserved.