Allvac 718Plus Alloy

Alloy name: Allvac 718Plus
Diagram No.: 993
Type of diagram: TTT
Chemical composition in weight %: 0.025% C, 18.0% Cr, 2.70% Mo, 1.0% W, 9.0% Co, 10.0% Fe, 5.40% Nb, 0.70% Ti, 1.45% Al, 0.007% P, balance is Ni
Alloy group: Nickel-based alloys
Note: TTT Curve of Delta Phase Precipitation Starting in 1900F Hot Rolled Allvac 718Plus.
The Delta precipitation rate is also significantly reduced from 1750F/954C to 1800F/982C, as shown in Figure. A one hour time to initiate intragranular precipitation at 1750F/954C may require more than 10 hrs at 1800F/982C. This behavior has very important implications for the heat treatment of alloy 718Plus.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service
Transformation Diagrams of Non-Ferrous Alloys

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Copyright © 2019 by Steel Data. All Rights Reserved.