Etchants for Zn and Alloys

Ag-Zn alloy-Alloy with 38 at.% Zn
Ag-Zn alloy-Alloy with 38% Zn
Ag-Zn alloy-Alloy with 50 wt.% Ag and 50 wt.% Zn
Al single crystal specimens-Physical etching
Al specimens as Al-Si (20%)-Electrolytic etching
All Zn alloys, for pressure die-casting, Zn coatings-Chemical etching
Al-Zn alloy-For alloy with 38 at.% Zn
Al-Zn alloy-For alloys with 25 at.% Zn
Al-Zn alloy-For alloys with 29 at.% Zn
Al-Zn alloy-For alloys with.5% Zn
Al-Zn alloys-Alloys with more then 8% Zn
Al-Zn alloys-For alloys with <% Zn
Al-Zn-Mg alloy-7039 alloy: 4% Zn, 2.8-3% Mg
Al-Zn-Mg alloy-Al, 53% Zn, 1.7% Mg (+0.04% Ti)
Al-Zn-Mg alloy-Alloy with 5.3% Zn, 2.5% Mg
Al-Zn-Mg alloy-Alloy with 6% Zn and 2% Mg
Al-Zn-Mg alloy-Alloy with 6.86 wt.% Zn, 2.5 wt.% Mg
Al-Zn-Mg alloy-Alloy with 6.86% Zn, 2.30% Mg
Al-Zn-Mg alloys-Alloys with 4-6% Zn, 1-4% Mg
Al-Zn-Mg-Cu alloy-7075 alloy: 5.5-5.8% Zn, 2.1-2.6% Mg, 1.6-1.7% Cu
Al-Zn-Mg-Cu alloys-7075 alloy: 5-3% Zn, 2-7% Mg, 1.6 Cu + Fe, S, Cr, Ti, Mn
Al-Zn-Mn alloy-Alloy with 5% Zn, 2% Mg
Au-Zn alloys-For cast alloys with < 30 at.% Zn
Beta brass (Cu-Zn)-Alloys with 45-48% Zn
Be-Zn alloys-For alloys with < 0.6% Zn
Brass specimens-Acid, cutting
Brasses (Cu-Zn) specimens-Electro polishing
Coated steel sheet-Steel sheeet coated with Zn for automotive industry
Cu-Ga-Zn alloys-Cu -.4 at.% Zn - 12.5 at.% Ga
Cu-Zn alloys-52.55 at.% Cu - 48.45 at.% Zn
Cu-Zn alloys-58 at % Cu - 42 at.% Zn
Cu-Zn alloys-Alloys with low Zn content
Cu-Zn alloys-Alloys with up to 35% Zn
Cu-Zn alloys-For alloys with < 30 at.% Zn
Cu-Zn alloys-For alloys with 38% Zn
Cu-Zn-Mn alloys-44-48% Zn, 1-4% Mn
Cu-Zn-Ni alloys-45-48% Zn, 2-5% Ni
Cu-Zn-Sn alloy-64 at.% Cu - 33.5 at.% Zn - 2.5 at.% Sn
GaAs (111) wafers Cr, Te, and Zn doped-Chemical etching
Gallium phosphide (GaP)-S doped n-type, Zn doped p-type
Ge-Zn eutectic-Chemical etching
Gilman's solution (2)
InP (100) wafers, Zn doped p-type-Chemical etching
InP (100) Zn doped p-type wafers-Chemical etching
InP (100) Zn doped p-type wafers-Chemical polishing
Klemm's etchant I
Mg-7.5% Al-2.5% Zn alloy-Chemical etching
Mg-Al-Zn alloy-Al, 3-5% Mg, 4-5% Zn (+ Cu, Fe, Si, Ni, Cr)
Palmerton's etchant 1
Palmerton's etchant 2
Pure Zn and low-alloy Zn-Chemical etching
Pure Zn, Zn-Cu alloys-Chemical etching
Pu-Zn alloys-Electrolytic and chemical etching
Zinc alloys-Electropolishing
Zinc and its alloys-Cu free zinc alloys. Grain contrast
Zinc and its alloys-Zn alloys containing Cu. Grain structure
Zinc and zinc alloys-Chemical etching
Zinc and zinc alloys-Chemical etching
Zinc and zinc alloys-Chemical etching
Zinc and zinc alloys-Chemical etching
Zinc and zinc alloys-Chemical etching
Zinc and zinc alloys-For general macroetching
Zinc and zinc alloys-For rolled Zn-Cu alloys
Zinc and zinc alloys-For zinc and zinc die-casting aloys; alloys AC41A or AG40A
Zinc and zinc alloys-To reveal the microstructure in alloys of zinc with metals of the iron group
Zinc and zinc alloys-To reveal the microstructure
Zinc oxide (ZnO)-Removal of surface damage with above solution
Zinc oxide single crystal (ZnO)-Chemical polishing and etching
Zinc oxide-bismuth oxide=Chemical etching
Zinc oxide-bismuth oxide-antimony oxide-tin oxide-5% Sb2O3, 1% Bi2O3, 1% SnO2
Zinc oxide-bismuth oxide-ZnO x Bi2O3
Zinc oxide-lithium oxide system (ZnO-1 at.% Li2O)-Chemical etching
Zinc selenide (ZnSe)-Chemical etching
Zinc selenide (ZnSe)-Chemical etching
Zinc selenide (ZnSe)-Chemical polishing
Zinc selenide (ZnSe)-Chemical polishing
Zinc selenide (ZnSe)-Chemical polishing
Zinc selenide (ZnSe)-Etchant for zinc selenide single crystals
Zinc single crystal-Sample preparation procedure
Zinc specimens-A cellular structure is shown in Zn single crystals by etching in this solution
Zinc specimens-An extremely useful electrolyte for certain applications, but dangerous
Zinc specimens-Chemical etching
Zinc specimens-Chemical etching
Zinc specimens-Chemical etching
Zinc specimens-Chemical polishing and etching
Zinc specimens-Chemical polishing and etching
Zinc specimens-Chemical polishing
Zinc specimens-Chemical polishing
Zinc specimens-Chemical polishing
Zinc specimens-Electro polishing
Zinc specimens-Electro thinning by window technique
Zinc specimens-Electro thinning by window technique
Zinc specimens-Electro thinning
Zinc specimens-Electrolytic polishing
Zinc specimens-Electrolytic polishing
Zinc specimens-Electrolytic polishing
Zinc specimens-Electrolytic polishing
Zinc specimens-Electrolytic polishing
Zinc specimens-Electrolytic polishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Electropolishing
Zinc specimens-Etch pits etching
Zinc specimens-Fe, Pb, Mg, Cu, and Ni-Zn alloys
Zinc specimens-Fiber structure in extruded Zn alloys
Zinc specimens-For most types of Zn and Zn alloys. Especially for rolled Zn containing Pb and Zn-Cu alloys
Zinc specimens-Ion etching
Zinc specimens-Physical etching
Zinc specimens-Pure and low alloy Zn
Zinc specimens-Pure Zn. Zn alloys with Cu. Cast materials
Zinc specimens-Technically pure Zn. Zn-Co and Zn-Cu alloys. Generally for low alloy Zn
Zinc specimens-Tint etching of Zn and low alloy Zn
Zinc specimens-Zn alloys containing Cu
Zinc specimens-Zn alloys with metals of the iron group. Zn platings
Zinc specimens-Zn alloys with much nobler constituents, for example, Cu, Ag, Au
Zinc specimens-Zn and Zn rich alloys. Zn-Cu-Al alloys
Zinc sulphide (ZnS)-Chemical etching
Zinc sulphide (ZnS)-Chemical polishing and etching
Zinc telluride (ZnTe)-Chemical etching
Zinc telluride (ZnTe)-Chemical polishing and etching
Zinc-aluminium-copper alloys (Zn-Al-Cu)-Ion etching
Zinc-aluminium-copper alloys (Zn-Al-Cu)-Ion etching
Zinc-aluminium-copper alloys (Zn-Al-Cu)-Ion etching
Zinc-aluminium-copper alloys (Zn-Al-Cu)-Ion etching
Zinc-Chemical polishing
Zinc-Chemical polishing
Zinc-Electrolytic polishing
Zinc-Electrolytic polishing
Zinc-Zn (99.99%)
Zinc-Zn (dilute alloys)
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zinc-Zn
Zn (0001) Cleaved wafers
Zn (0001) freshly cleaved surface-Acid, defect
Zn (0001) platelets-Chemical cleaning
Zn (0001) single crystal wafers-Metal decoration
Zn (0001) specimens-Electrolytic polishing
Zn (0001) wafers and cylinders-Chemical etching-P-2 etchant
Zn (0001) wafers and cylinders-Chemical etching-P-3 etchant
Zn (0001) wafers and ingots-Chemical polishing
Zn (0001) wafers-Acid cutting
Zn (0001) wafers-Chemical etching
Zn (0001) wafers-Chemical etching
Zn (0001) wafers-Chemical etching-E etchant
Zn (0001) wafers-Chemical etching-P-l etchant
Zn (0001) wafers-Chemical polishing/etching
Zn (0001) wafers-Zn (0001) wafers used in an etch pit study
Zn alloy single crystal platelets-Chemical polishing
Zn alloys (Cu-free)
Zn alloys (with Cu) - Palmerton etch
Zn alloys
Zn and alloys
Zn and Cu specimens-Ionized gas etching
Zn and lean alloys - Klemm's I reagent
Zn and lean alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn and Zn alloys
Zn cylinder with (10T0) prism orientation-Chemical etching
Zn die-casting alloys - Modified Palmerton reagent
Zn diffused into GaAs wafers-Chemical etching
Zn diffused into InSb, (100), n-type wafers-Chemical etching
Zn pellets-Chemical cleaning
Zn phosphors-Solution used as a general removal etch
Zn phosphors-Solution used as a general removal etch
Zn single crystal specimens-Acid, cutting
Zn single crystal specimens-Dislocation etching
Zn single crystal wafers-Zn single crystal wafers acid-saw cut using a braided SST wire and nitric acid
Zn single crystal-Chemical etching
Zn single crystals-Chemical polishing
Zn specimens 3/8" thick-Acid, cutting
Zn specimens-Chemical etching
Zn specimens-Chemical polishing
Zn specimens-Electrolytic etching
Zn specimens-Electrolytic polishing
Zn specimens-Electrolytic polishing
Zn specimens-Electrolytic polishing
Zn wafers and single crystals-Zn (0001) cleaved wafers
Zn, Zn-Sn-Fe, Zn-Al-Cu-Electrolytic polishing
ZnCd
Zn-Cu alloys - Modified Palmerton reagent
Zn-Cu alloys
Zn-Fe, Zn-Al, and Zn-Cr alloys and Zn coated steels
ZnO (0001) wafers from natural zincite-Chemical etching
ZnO
Zn-rich alloys
ZnS (synthetic)
ZnTe (111) wafers-Thermal etching
ZnTe specimens-Chemical cleaning
Zr poly sheet-Chemical thinning

Copyright © 2014 by Steel Data. All Rights Reserved.