Nitride Inclusions

(Mn0.9Ti0.1)S, (Ce, La)S, (Al, Ce, La)2O3, Ti(C,N) inclusions in CMnSi steel
(Ti,Ca)-oxides and Ti-nitrides in 409L stainless steels I
(Ti,Ca)-oxides and Ti-nitrides in 409L stainless steels II
(Ti,Cr)2O3, Ti-Si-Cr-(Al-Mn-O), MgAl2O4-TiOx, TiN inclusions in ferritic stainless steel
25MnCrSiVB6 steel
Al inclusions observed after Ti alloying
Al oxide, Ti-Al oxide, TiN, Al-Mg oxide inclusions in low carbon steel
Al oxide, TiN, Al-Mg oxide inclusions in steel
Al2O3 + MnS + TiN inclusions in low alloy steel I
Al2O3 + MnS + TiN inclusions in low alloy steel II
Al2O3 and TiN inclusions in spring steel
Al2O3-MgO, MnS, TiN inclusions in GCr15 steel
Al2O3-TiN, Al2O3-TiN-Ti2O3 inclusions in Ti-alloyed Al-killed steel grade
AlCaO, TiN inclusions in 100Cr6 steel
AlN inclusions in steel
AlN inclusions in weld, high aluminium E7O-T4
AlN inclusions in weld, high aluminium E7O-T4
AlN with Fe-rich areas in in weld, high aluminium E7O-T4
Aluminium nitride in Al killed steel
Aluminium nitride in Fe-Al alloy
BN inclusions in C45BN steel
BN, (Fe,Cr)3O4, FeO, Cr2O3 phases in 9Cr3W3CoVNbBN steel
Boron nitride inclusions formed during the slow cooling heat treatment after a re-dissoluted boron nitride treatment of P122 steel
Boron nitride type inclusions observed at fractured surface of the P122 steel
Coarse size boron nitride inclusions under various heat treatments of the P122 steel
Complex NMI in low alloy steel I
Complex NMI in low alloy steel II
Complex inclusions in runner samples
Cr2N in Cr-Mn steel I
Cr2N in Cr-Mn steel II
Cr2N in Cr-Mn steel III
Different inclusions in type 303, 304 and 321 stainless steels
EDX and PEELS analysis of Al2O3-TiN inclusion in steel
EDX and PEELS analysis of Al2O3-TiO-TiN inclusion in steel
Element mapping of a complex oxy-sulfide inclusion in steel
Example of TiN formed in the interdendrite spacings in steel
Example of non-metallic TiN inclusions in steel
Examples of NMI in 100Cr6 steel
Examples of inclusions in steel samples
Extraction replica of Ti2O3 inclusion with adhered MnS and TiN
Inclusion size and its distribution obtained by the inclusion extraction technique for the Tundish samples
Inclusions in DP-Type and TRIP-Type cold rolled steel sheet
Inclusions in DP-Type and TRIP-Type cold rolled steel sheet II
Inclusions in 4140 steel
Influence of Delta-phase on the formation of boron nitride type inclusions in P122 steels
Influence of remelting, hot working and heat treatment on the formation of boron nitride inclusions in P122 steel
Influence of the cooling rate on the formation of boron nitride inclusions in P122 steel
Influence of the rolling direction on the shape of boron nitride inclusion groups in P122 steel
MnO/TiO2/Al2O3/TiN complex inclusion in SUS 304 stainless steel
MnS and MnSiN2 inclusions in cold rolled 0.5% Si steel
MnS and TiN inclusions in AISI 303, 315 and 319 steels
MnS and TiN inclusions in carbon manganese steel
MnS, Al2O3, nitride inclusions in G42CrMo4 cast steel
MnS, V-Ti(N), VN, V(C,N), V-Ti(C,N) inclusions in V-N, V-Ti-N steels
NMI in 35B2+Cr steel
NMI in ESR AISI H11 hot work tool steel
NMI in Ni-based alloy 825
NMI in electrical steel
NMI in high manganese austenitic steel
NMI's in high manganese TWIP steels
Non-metallic inclusions in 57SiCr6D, 3613, 100Cr6 steels
Non-metallic inclusions in medium carbon steel
Non-metallic inclusions in medium carbon steel
Oxide and MnS inclusions in steel
Oxides, sulfides and nitrides serving as nucleation sites for IGF
Precipitates in the 18% Cr, 10% Ni, 0.3% Ti in continuosly cast slab
Preferential precipitation of Cr2N at inclusion
SEM and TEM analysis of AlN inclusions in high-Al ingot
Semi-Cluster type microinclusions in steel
Semi-clusters inclusions in steel
Singular micro-inclusions in steel
Singular micro-inclusions in steel
Spherical aluminium oxide inclusion largely covered by titanium nitride in polished steel surface
Sulfide and nitride inclusions in steel
Sulfide, carbonitride and nitride inclusions in TRIP steel
Sulfide, oxysulfide, nitride inclusions in steel
TEM micrographs and EDX microanalysis of extraction replicas from 0.37C-0.56Si-1.45Mn steel
The effect of deformed non-metallic inclusions on mechanical properties of steel
The morphology and compositions of inclusions before deoxidation and after alloy addition in ultra low carbon steel
Ti oxide and TiN-MnS inclusions in the heat effected zone after a welding
Ti-nitride in ferrotitanium
Ti-nitrides in rolled steel
TiN in Fe-1.35Ti-0.025C-0.035N steel
TiN inclusions in X12Cr13 steel
TiN inclusions in medium carbon steel
TiN, MnS, (Ti+Mn)S, (Cu+Mn)S, TiS, Ti4C2S2 inclusions in IFHS steel
TiO2, TiN, Al2O3 inclusions in TiO2 and TiN particle additions
Titanium nitride inclusions in steel
Titanium nitride particles on a mold crust
Titanium nitrides in a Ti-stabilized austenitic stainless steel
Typical inclusions extracted by Slimes from steel samples of the ladle, tundish and slab in Baosteel
Typical inclusions observed by microscope in the ladle, tundish, mold, and slab in Baosteel
ZrN inclusions in a rolled steel
ZrO2 -MnS -TiN inclusions in low C-Mn steel
ZrO2, TiN, MnS inclusions in ultra high strength low carbon steel

Copyright © 2018 by Steel Data. All Rights Reserved.