0.71C-1.83Si-0.52Mn-0.5Cr-0.19Mo Steel

Steel name: 0.71C-1.83Si-0.52Mn-0.5Cr-0.19Mo
Diagram No.: 4974
Type of diagram: TTT
Chemical composition in weight %: 0.71% C, 1.83% Si, 0.52% Mn, 0.5% Cr, 0.005% P, 0.005% S, 0.19% Mo, 0.13% Cu, 0.02% Ni, 0.009% Al, 46 ppm N, 15 ppm O
Steel group: Silicon steels
Note: T-T-T diagram for a 1.83% silicon steel containing 0.71% carbon. The number swithin the diagrams indicate the amounts of transformation in percentage. The marks of LP, DP, UB, LB, Bs and Ms in the T-T-T diagram indicate lamellar pearlite, degenerate pearlite, upper bainite, lower bainite, bainite starting point and martensite starting point, respectively.
Reference: Yun Chul JUNG, et al., Bainite Transformation in a Silicon Steel, ISIJ International, Vol. 37 (1997), No. 8, pp. 789-796.

Transformation Diagram


Click the image to enlarge the diagram.

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.





Copyright © 2019 by Steel Data. All Rights Reserved.