10CrSiMoV-7 Steel

Steel name: 10CrSiMoV-7
Diagram No.: 5112
Type of diagram: CCT
DIN designation: 10CrSiMoV-7
Mat. No. (Wr. Nr.) designation: 1.8075
Chemical composition in weight %: max. 0.12% C, 0.90-1.20% Si, 0.35-0.75% Mn, max. 0.035% P, max. 0.035% S, 1.60-2.00% Cr, 0.25-0.35% Mo, 0.25-0.35% V
Steel group: High-temperature tube steels
Note: The transformation and precipitation behaviour on continuous cooling is shown in Fig. During cooling from the austenitizing temperature MX (VC) is precipitated, first in the austenite and later, to a greater extent, in the pre-eutectoid ferrite. An MX eutectoid in the form of a border is then formed. At lower cooling rates pearlite is also formed. After the end of the alpha-gamma transformation M7C3 is also precipitated in the form of needles.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.












Copyright © 2019 by Steel Data. All Rights Reserved.