X12CrMo9-1 Steel

Steel name: X12CrMo9-1
Diagram No.: 5122
Type of diagram: CCT
DIN designation: X12CrMo9-1
Mat. No. (Wr. Nr.) designation: 1.7386
Chemical composition in weight %: max. 0.15% C, 0.25-1.00% Si, 0.30-0.60% Mn, max. 0.030% P, max. 0.030% S, 8.00-11.00% Cr, 0.90-1.10% Mo
Steel group: Alloy special steels
Note: The transformation and precipitation behaviour of this steel is shown in Fig. In contrast to steels with a low chromium content, the formation of M23C6 begins here already on the austenite grain boundaries at cooling rates which do not yet lead to the formation of ferrite. The precipitates usually have a dendritic form. At very cooling rates the M2X borders coagulate. The high chromium content suppresses the bainite reaction. An M2X eutectoid in the form of borders forms instead of pearlite.Cementite is precipitated during tempering of the martensite, and M23C6 and M2X in the pre-eutectoid ferrite.
Reference: Not shown in this demo version.

Transformation Diagram

Price: 30.00 US $
Buy Online Transformation Diagram

Other Steel Data links
Carbides in Steel
Etchants Database
Hardenability Diagrams of Steels
Macro Defects in Steel
Non-Metallic Inclusions in Steel
Tempering Diagrams of Steels
CCT and TTT Diagram Calculating Service

Disclaimer: The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.











Copyright © 2019 by Steel Data. All Rights Reserved.